Quicksnap steering head adapter

Adjusting slide for fixing the Steering head connection black

incl. 2x grub screw M6x12 and 1x pan-head screw M6x12

€23.60*

Item number: E8199000013

Details

Steering head incl. brass sleeve

and spring-loaded thrust piece

€174.90*

Item number: E8199000026

Details

Steering damper rubber ø40x30 soft

Soft version, for quicksnap adapter Threaded bolt M8x16mm (shortened) with fastening screw M8x15 ISO 7991

€21.60*

Item number: E8199700014

Details

QuickSnap steering head adapter, L, hard damping

Standard version for rigid frame adapter/ Adaptivbike e-assistant and wheel-e: - Left-hand operation - Eccentric shaft with 70mm lever - Steering damper hard incl. mounting material for the adapter tube

€507.20*

Item number: E8199000020

Details

Steering damper rubber ø40x30 hard

hard version, for quick-snap adapter Threaded bolt M8x12mm (shortened) with fastening screw M8x16 ISO 7991

€19.30*

Item number: E8199700013

Details

Steering head bearing spacer set

Two spacers each for top and bottom incl. fixing screws Incl. M8 lock washers and new screws. The M8 screws must be glued in with medium-strength threadlocker.

€38.60*

Item number: E8199000029

Details

Jack incl. dowel pin

PA intern: hammer notch into dowel pin

€34.00*

Item number: E8199000006

Details

Small parts set steering head adapter

is required for mounting the steering head adapter

€45.20*

Item number: E8199000209

Details

Spring unit steering head Quicksnap

Spring unit (eccentric mechanism release) for Quicksnap steering head incl. assembly and function test. Please note that the spring unit can only be replaced by ProActiv for safety reasons. To do this, send the entyre steering head to the ProActiv factory.

€197.40*

Item number: E8199000002

Details

Circlip DIN471-10x1

€1.60*

Item number: E8199900090

Details

Eccentric shaft with 70mm lever for Quick Snap connection

incl. fastening material Circlip DIN471 10x1 Lever extensions optionally available: - Lever extension straight 150mm E8199000124 - Lever extension curved 170mm E8199900070

€87.60*

Item number: E8199000118

Details

Locking eccentric lever NJ1; Wheel-e

To secure the long eccentric lever.

€21.10*

Item number: E8199000068

Details

Deep groove ball bearing 6004 2RSH SKF

Outside - Ø 42mm Inside - Ø 20mm Height 12mm

€17.00*

Item number: E8199000031

Details

QuickSnap steering head adapter, left, soft damping

Manual version for rigid frame adapter/adaptive bike and FREEWAY: Left-hand operation Eccentric shaft with 70mm control lever Soft steering damper incl. mounting material for the adapter tube

€507.20*

Item number: E8199000016

Details

Steering head adapter QuickSnap, R, hard damping

Standard version for the rigid frame adapter on the Husk-e. Also suitable for Wheel-e and Freeway. Right-hand operation Eccentric shaft with 70mm lever Steering damper hard incl. mounting material for the steering head connection For model year older than 01/2016, the docking plate 8199000028 must be replaced

€507.20*

Item number: E8199000061

Details

Spring-loaded thrust piece for steering head

for positioning the eccentric shaft

€6.20*

Item number: E8199000033

Details

Lever extension eccentric lock for Quick Snap connection

straight version, 150mm long Makes it easier to clamp the rigid frame and traveler adapter. incl. mount, stop and fastening screws Mounting stop: screw into adapter head on the left or right depending on the operating side Without eccentric shaft!

€68.50*

Item number: E8199000124

Details