Equipment: 1/2" axle,
socket length 50.8 mm (2") and e-fix torque support, one frame reinforcement.
The wheelchair should be adjusted with a seat depth of 6 cm and the backrest at a 90° angle to the floor.
Regarding camber, the following specifications from Alber apply: up to 60 kg: 3°; over 60 kg: 1°
Wheelchair delivery to: Alber GmbH / Authorized Dealer
(Installation must be performed by Alber, as a
safety circuit is required in accordance with Alber installation guidelines)
Available starting July 2026
Frame reinforcement via an additional rear cross tube (Ø40 mm).
Recommended for riders weighing 85 kg or more and using a power-assisted drive system, or when using a trailer.
Adaptation of the Alber anti-tipping support mount is possible.
for straight front end
Length: 420 mm
Width: 270 mm
The width of the footrest may need to be shortened by a specialist dealer.
SB: cm
USL: cm
To check the dimensions for a foot bar conversion, please refer to the document in the documentation section for the required tube length.