Front suspension

Upper right control arm

with joint heads made of tempered steel, already adjusted to length and angle

€156.00*

Item number: E8105400010

Details

50 mm fittig screw

for mounting the front shock absorber on the lower control arm

€20.40*

Item number: E8105000050

Details

20 mm fittig screw with cylinder head

for mounting the wishbones on the connecting tunnel

€14.00*

Item number: E8105000020

Details

30 mm fitting screw

for mounting the dampers at the front top and rear of the carriage and for mounting the damper carriage at the rear between the motor mounting plates

€16.00*

Item number: E8105000030

Details

Chain giude Chainring Cardan joint

For the movable chainring on the cardan joint. Made of black PA6 plastic Includes mounting hardware Two pieces are required for a complete replacement.

€14.10*

Item number: E8105500011

Details

Front underride guard

Includes screw-on mounting and installation materials

€54.50*

Item number: E8105400036

Details

Lower handlebar

Includes ball joints Final adjustment of length and angle must be made on the bike. We also recommend replacing the E8105000020 fitting screws when replacing. Two pieces are required.

€144.00*

Item number: E8105400032

Details

Upper left control arm

with joint heads made of tempered steel, already adjusted to length and angle

€156.00*

Item number: E8105400014

Details

16 mm fitting screw long thread

for mounting the wheel carriers on the wishbones

€14.00*

Item number: E8105000016

Details

Joint head M8 left-hand thread

for steering rods and rod connections Materials: Housing: 42CrMo4 tempered steel, forged, zinc-plated Bearing shell: 11SMn30+C free-cutting steel, zinc-plated, with bonded PTFE fabric Inner ring: 100Cr6 roller bearing steel, hardened, ground, polished Includes M8 lock nut

€22.50*

Item number: E8105000005

Details

Rod end M8 right-hand thread Standard version

For control arm and wheel carrier bearings as well as for steering rods and rod connections Materials: Housing: 42CrMo4 tempered steel, forged, zinc-plated Bearing shell: Free-cutting steel 11SMn30+C, galvanized, with bonded PTFE fabric Inner ring: Roller bearing steel 100Cr6, hardened, ground, polished Includes M8 lock nut Important information: The rod ends on the wheel carrier must be installed using a special alignment tool to ensure that the screw-in depth and angle position are correct. Otherwise, collisions with the wheel carrier may occur during suspension compression and/or steering. The upper control arm alignment tool has the item number E8105001010. The lower control arm alignment tool has the item number E8105001011.

€22.50*

Item number: E8105001014

Details