Hub gear

Switching button EP8

without cable for Shimano Gen. 2 cable Programmed as shift button: up --- rear upshift down --- downshift rear Suitable for Husk-e with EP8 motor.

€144.40*

Item number: E8117200347

Details

EP6 Gen. 2 switch

for Shimano Gen. 2 battery management suitable for installation on Husk-e with EP6 motor, center button to switch between automatic/manual without cable

€79.20*

Item number: E8117200425

Details

20" Nexus 8-speed Di2 drive wheel 36 holes

20" drive wheel with Nexus 8-speed Di2 gears. With integrated coaster brake and 5-hole disc brake mount. Only in combination with Shimano E6110 motor.

€495.00*

Item number: E8117200005

Details

Shimano Di2 8-speed motor unit

For NEXUS / ALFINE Di2 gear hubs

€173.90*

Item number: E8100200188

Details

Cable for DI2, 2nd Gen. 950mm

suitable for Shimano EP8 drivetrain systems

€51.70*

Item number: E8117200388

Details

Chain HG53 116 links

for the primary drive on the Husk-e. The chain length always depends on the position of the bottom bracket and the number of teeth on the chainring. It may be necessary to shorten the chain by a few links. Chain from the bottom bracket to the motor / Pinion gearbox. Incl. a chain rivet pin to connect the chain.

€33.80*

Item number: E8117200000

Details

Cable für DI2, 2nd Gen. 200mm

suitable for Shimano EP8 drive systems

€39.40*

Item number: E8117200353

Details

Chain HG53 110 links

for the secondary drive on the Husk-e. Chain may only be used for hub gears and the Pinion gearbox. NOT suitable for derailleur gears. The chain length is designed for use with a chain tensioner. If no chain tensioner is used, the chain must be shortened by 20 links. Chain from the motor / Pinion gearbox to the gear hub / sprocket of the bike. Incl. a chain rivet pin to connect the chain.

€32.20*

Item number: E8117200001

Details

Adapter DI2 Kabel 1st. Gen. auf 2nd Gen.

Adapter DI2 cable 1st. Gen. to 2nd Gen.

for connecting first generation DI2 cables (Ø4.9mm connector) with second generation cables (Ø3.4mm connector). Required for connecting older components with the EP8 system.

€33.50*

Item number: E8117200349

Details

20" Drive wheel Nexus 5-speed Di2 32 holes

20" drive wheel with Nexus 5-speed Di2 gears.

€437.10*

Item number: E8117200007

Details

Cable for DI2 550mm long

Cable for Shimano DI2

€38.00*

Item number: E8100200331

Details

Shimano Di2 5-speed motor unit for EP6 / EP801

für die Nexus 5-Gang Nabe ermöglicht das elektrische Schalten inkl. Automatikfunktion

€125.00*

Item number: E8117200431

Details

Sprocket 20 teeth for hub gears

suitable for Nexus and Alfine hubs.

€7.60*

Item number: E8100200120

Details

Sprocket 27 T for Nexus DI2 5-speed Gear hub

Only for SG-C7000/7050-5 gear hubs

€16.80*

Item number: E8117200342

Details

Support cable for Di2 cable

Button and support level switch on the handle always require a support cable, as the thin Di2 cable is too unstable. This article is required if no support cable is available. It contains all the materials required for a dummy cable. The spring with a length of 160mm must be glued into the bottom bracket holder at the Husk-e.

€164.30*

Item number: E8117200041

Details

Sprocket 24 T for Nexus DI2 5-speed Gear hub

Only for SG-C7000/7050-5 gear hubs

€16.80*

Item number: E8117200377

Details

Chain tensioner Alfine

for the Husk-e: required for the combination of hub gear and luggage rack. Must be shimmed with the supplied 2 mm spacer to achieve the correct chain line. --------------------------------------------------------------------------------------------------------- For the FOXX: Required in the bottom bracket and main frame to tension the chains.

€44.30*

Item number: E8117200034

Details

Shimano motor unit Di2 5 speed

For NEXUS / ALFINE Di2 gear hubs

€173.90*

Item number: E8117200326

Details